|
| |
This page features Zephyr's variety of wrenches and wrench holders.
Product Categories (click one):
Click on categories & products in
the index chart for product descriptions and prices.
Storz Spanner Wrenches
For Snaptite, Angus, Jaffrey, or Equal (except Red Head)
 | Model #15
Can be stored in our Model #16, #E19,
or #53 Holder
Features:
Aluminum alloy casting
Fits Storz type 4" - 5"
Gas cock shut off slot
Lightweight with comfortable grip
Dimensions: 5/8" thick x 13½" long x 3½" deep
Weight: 13 oz.
Vega Finish |
|
|
| Model #17
Storz/Rocker
Combination
The one to use on Jaffrey, Angus, and other
close-collar couplings. Works great on Snaptite also. Can be
stored in our Model #16 holder.
Features:
Aluminum alloy casting
Fits 1½" - 4" rocker lugs
Fits 4" - 5" Storz couplings
Weight: 14 oz.
Dimensions: 14" long
Easy grip handle
Gas cock slot
Vega FInish
|
|
|
| Model #23 Small Duel Spanner
For Canadian, European and American
application. Fits both styles of smaller Storz couplings. Can be
stored in either Model #16 or #19 holder.
Features:
Aluminum alloy casting
Dimensions: 14½" long
Weight 13 oz.
Vega Finish
|
|
|
| Model #27 Storz/Pin
Lug/Rocker
Lug/Combination
Can be stored in Model #16 or #19 holder. Will
fit Jaffrey, Angus, Snaptite and other couplings as well as various
short pin lug and rocker couplings.
Features:
Aluminum alloy casting
Fits 2"- 4" Pin Lug & Rocker Lug
Fits 4" - 5" Storz Couplings
Easy grip handle with gas cock slot
Dimensions: 13½" long
Weight 13½ oz.
Vega Finish
|
|
|
| Model #28 Utility -
Locking Lever Spanner
When ordering: Due to variations in
locking lever Storz couplings, please specify manufacturer's name
and model. |
|
|
| Coupling
Size |
Wrench Model |
Weight |
Dimension |
Holder No. |
| 4" |
28-4 |
1 lb. |
14" long |
14 |
| 5" |
28-5 |
1 lb. |
14" long |
14 |
| 6" |
28-6 |
1 lb. |
15" long |
14 |
| Model #29 Trouble Wrench
for
Stubborn Storz Couplings
Can be stored in our Model #14 A1 Holder.
Features:
Aluminum alloy casting
Works on all 4"-5"-6" couplings
Weight 1½ lbs.
Dimensions 19" long
Vega Finish
Long handle for greater leverage
A good trouble shooter |
|
|
| Model #57 Play Pipe Nozzle
Holder
Features:
Aluminum alloy casting
Plastisol coated cradle yoke
Dimensions 6" wide x 9" long x 2½" deep
Ideal for pre-connect or storage
|
|
 |
| Model #24 Assist Device
for Storz & Large Rocker Lug Couplings
Features:
Aluminum alloy casting
Use as a ground wrench to connect or disconnect long hose lines
Weight 4½ lbs.
Dimensions 18" long x 7½" wide x
2¾" high
|
|
Model 24 (left)
Model 24 & 29 in action
(right)
|
|
Model #26 Assist Device
Same as Model #24, but designed for beavertail or tailboard mounting
|
|
|
Spanner Wrench Holders
| Model #14 Pin-Roc Holder
Features:
Aluminum alloy casting
Holds (2) Zephyr Model #13 Pin-Roc Spanner Wrenches
Spring loaded clamping heads
Dimensions 4½" wide x 8" long x 1" deep
Weight Approximately 2 lbs.
Vega Finish |
|
|
| Model #16 Storz Wrench
Holder
Features:
Aluminum alloy casting
Holds (4) Zephyr Model #15, #17, or #27 Storz wrenches
Used as combination if desired
Spring loaded clamping heads
Dimensions 4½" wide x 8" long x 1" deep
Weight Approximately 2 lbs.
Vega Finish |
|
|
| Model #25 Wrench Holder
A companion for the Model #7 Junior Pin-Roc
Features:
Aluminum alloy casting
Holds (2) Model #7 Junior Spanners
Spring loaded clamping heads
Dimensions: 7-1/8 wide x 8-5/8" long x 1" deep
Weight 1½ lbs.
Vega Finish |
|
|
Click
here to see our Wrench and Holder Selection Chart
Conventional Spanner Wrenches
| Model #7 Junior Pin-Lug
Rocker
Can be stored in Zephyr Model #18 Tri-Lok, Model #54,
or Model #25 Holders.
Features:
Aluminum alloy casting
Fits 1½" - 3" Couplings
Easy grip handle with gas lock slot
Dimensions 11½" long
Weight 10 oz. |
|
|
| Model #12 Ideal Spanner
(Pocket Size)
Alternate to Folding Pocket Spanner
Features:
Aluminum alloy casting
Fits pin lug and rocker lug couplings up to 3" size
Gas cock slot
Weight 7½ oz.
Dimensions 2" wide x 3/8" thick x 8½" long |
|
|
| Model #13 Pin Roc Spanner
Can be stored in our Model #14, #19, and #53
holders
Features:
Aluminum alloy casting
Fits large diameter pin lug and rock lug couplings 4½", 5",
6"
Weight 15 oz.
Dimensions 3¼" wide x ¾" thick x 14½" long |
|
|
Handy Wrenches
| Model #70 Cap Wrench
Features:
Aluminum alloy casting
Loosens and tightens foam container caps
Fits 70mm plastic caps
Weight 5 oz.
O.D. 3¼"
Length 9½"
Vega Finish |
|
|
| Model #100 Gas Cock
Wrench-Residential
Features:
Aluminun alloy casting
Convenient pocket size - easy on clothing
1/8" - 1" valve capacity
Weight 5 oz.
Dimensions:
1¼" - wide x ½" thick x 7" long |
|
|
| Model #5 Pin Hole Spanner
Features:
Aluminum alloy casting
A favorite for Red Head couplings
Fits large diameter 5"-6" couplings
Hardened threaded pin
Weight 11 oz.
Length 12"
Vega Finish |
|
|
Universal Hydrant Wrench Holders
| Model #18 Tri-Lok Holder
Features:
Aluminum alloy casting
Holds (2) Spade Spanner Wrenches and (1) Hydrant Wrench--use Akron Brass,
Elkhart Brass, Red Head Brass, etc.
Spring loaded clamping heads
Dimensions 7-1/8" wide x 8-5/8" long x 1" deep
Weight Approximately 2½ lbs.
Vega Finish |
|
|
|
Model #19 Tri-Lok Holder
Features:
Aluminum alloy casting
Holds (2) Model #15, #17, or #27 Zephyr Spanner Wrenches
Spring loaded clamping heads
Dimensions 7¼" wide x
8-5/8" long x 1" deep
Weight Approximately 2½ lbs.
Vega Finish |
|
|
Non-Adjustable Hydrant Wrenches
| Model #50 Hydra-Tork
Wrench
4 Tools in 1
Patent applied for; can be stored in
Zephyr
Model #53 or #54 Holder.
Features:
Aluminum alloy casting
Molded-in manganese bronze insert for wear resistance
Combination pentagon and square drive - great for mutual aid assistance
Pin-lug/rocker-lug wrench built into handle
2½" - 6" diameter couplings
Yellow paint finish
Dimensions 17" long
Weight 2½ lbs. |
|
|
X-Long Hydra-Tork Wrench
| Model #56
Features:
24" long overall
Insert combinations available per "Hydra-Tork Capability
Chart" (see below)
Weight 3½ lbs. |
|
|
| Model #52 Hydra-Tork
Wrench
6 Tools in 1
Patent applied for; can be stored in Zephyr Model #53 Holder
Features:
Same as Model #50
In addition, will also handle 4" - 5" Jaffrey, Angus, and Snap-Tite
Storz couplings
Weight 3¼ lbs. |
|
|
Ordering
Information
Hydrant valve stem drives vary among
manufacturers. Zephyr has developed an integrated geometry design to operate most
hydrants. Before ordering, it is necessary to measure your hydrant valve
stem drive as follows:
|
Pentagon point to
flat dimension top and bottom. |
 |
Square across flats
top and bottom |
If your measurements fall within the dimensions
shown in the capability chart below, either style Hydra-Tork wrench should
operate your hydrant. Specify your required measurements when ordering the
Zephyr style Hydra-Tork wrench.
Hydra-Tork Capability Chart
Warning: Maximum Operating Torque is 1000
inch-pounds
| PENTAGON DRIVE VALVE |
SQUARE DRIVE VALVE |
| Top Dim. |
Bottom Dim. |
Top Dim. |
Bottom Dim. |
| 1.110" |
1.150" |
.875" |
31/32" |
| 1.140" |
1.180" |
.875" |
1.000" |
| 1.250" |
1.275" |
.940" |
.970" |
| 1.312" |
1.375" |
1.125" |
1.170" |
| 1.470" |
1.515" |
1.500" |
1.515" |
| FLAT TO POINT MEASUREMENT |
MEASUREMENT ACROSS FLATS |
Hydra-Tork Wrench Holder
| Model #53 Tri-Lok
Holder
Features:
Aluminum alloy casting
Suitable to hold any two Zephyr Storz wrenches
Secures Model #50 or Model #52 Hydra-Tork wrenches
Spring-loaded clamping heads
Dimensions 7-1/8" wide x 8-5/8" long x 1" deep
Weight 2¾" lbs.
|
|
Model #54 Tri-Lok
Holder
|
|
Model 54 similar to Model 53 for
conventional spanner wrenches |
Call
Toll Free: 1-800-253-9396
E-mail: info@zephyrindustries.com
|
