|
This page features Zephyr's Series I and II Nozzle
Holders
Click on categories & products in
the chart below to go to product descriptions
and prices.
Series I Nozzle Holders
Features:
Aluminum alloy casting
Vee cradle design to hold nozzle diameters up to 3-1/2"
Plastisol coated cradle tips for nozzle protection
Quick, latch and relase, grip eye
Long lasting, ozone resistant, rubber tie-down strap - easily replaceable
 |
Model #83 Nozzle Cup
Excellent with our Model 87 Bracket
Originally designed for aircraft de-icing
Plastisol coated
Bottom drain holes
Vega finish
|
Model #83-3
Nozzle Cup
3" I.D. cup diameter
Model #83-4
Nozzle Cup
4" I.D. cup diameter
|
 | Model #95 Side Mount
Simple installation to side of pumper
Ideal for booster line nozzles and pre-connect hand lines
Dimensions: 3" wide x 5" high x 5" deep
Weight: 13 oz.
Vega Finish |
|
|
| Model #96 Dual Mount
Easy installation to deck or side of pumper
High clearance for pistol grip models
Can be used as spare nozzle holder, or utility bracket
Dimension: 3" wide x 6½" high x 5" deep
Weight 1 lb. 3 oz.
Vega Finish
|
|
|
To Order: First determine the mounting
position on your vehicle. The sample mountings in the photos are
typical. Check the Nozzle diameter you will mount and select from the data
table below:
| Model No. |
Mount Position |
Nozzle Barrel Dia. |
Rubber Strap Re-order |
| 95-4 |
Side |
2" - 2½" |
9596-4* |
| 96-4 |
Dual |
2" - 2½" |
9596-4* |
| 95-5 |
Side |
2" - 3½" |
9596-5* |
| 96-5 |
Dual |
2" - 3½" |
9596-5* |
| *Note: -4
indicates 4" long strap; -5 indicates 5" long strap. |
Series II Nozzle Holders
Features:
Aluminum alloy castings
Vee cradle design to hold nozzle diameters up to 4"
Plastisol coated contact areas for nozzle protection
Quick, latch and release
Long lasting, ozone resistant, rubber tie-down strap - easily replaceable
Weight: Approx. 2¼ lbs.
Adjustable for 1½" x 2½" Nozzles
(3) verticle strut heights available
| Model #97 Rear Mount
Nozzle Holder
Ideal mounting at rear of pumper hose bed
Position at eye level for easy reach-in without boarding rear or deck
3" wide x 8¼" high x 7½" deep
Vega finish |
|
|
| Model #99 Side Mount
Nozzle Holder
Ideal for mounting to side of pumper at cross-lay area
Right angle design allows close mounting with minimum projection
4½" wide x 8¼" high x 6"
deep
Vega finish |
|
|
| Model #57 Play Pipe Nozzle
Holder
Features:
Aluminum alloy casting
Plastisol coated cradle yoke
Dimensions 6" wide x 9" long x 2½" deep
Ideal for pre-connect or storage
|
|
|
To Order: When ordering either model, please
specify throat dimension, bumper diameter, and barrel diameter of your nozzle.
Model
Number |
Mount
Position |
Nozzle
Barrel Diameter |
Strap
Range |
Rubber Strap
Re-Order |
| 97-4 |
Rear |
2"- 2½" |
2" - 3" |
9596-4* |
| 99-4 |
Side |
2"- 2½" |
2" - 3" |
9596-4* |
| 97-5 |
Rear |
3"- 4" |
3" - 4" |
9596-5* |
| 99-5 |
Side |
3" - 4" |
3" - 4" |
9596-5* |
*Note: -4 indicates 4" long strap; -5 indicates
5" long strap
| REMINDER |
Contact
Zephyr for your particular needs in Tools, Brackets, Holders, or any
item that can be produced in aluminum castings.
We invite your
inquiries and ideas |
Call
Toll Free: 1-800-253-9396
E-mail: info@zephyrindustries.com
| 
